Effect of Surface Treatment on Betel Nut (Areca catechu) Fiber in Polypropylene Composite

Betel nut fiber (Bn)/polypropylene (PP) composites were prepared in the different ratio of 10:90, 20:80, 30:70, 40:60 (Bn wt%:PP wt%) using extruding and hot press moulding technique. From the results, it can be inferred that Bn30:PP70 mixture composite (BnPP) showed better performance among the composites prepared. For further improvement, betel nut fiber was subjected to detergent wash as well as alkali treatment for composite preparation. This work investigated the tensile strength, bending strength, tensile modulus, bending modulus, elongation at break and impact strength of the composites. Fracture morphology of the composite as well as the water absorption capacity has been monitored.     

The correlation of total and extractable heavy metals from soil and domestic sewage sludge and their transfer to maize ( Zea mays L.) plants

A study to understand the mobility and transport of heavy metals (HMs) from soil and soil amended with sewage sludge to maize plants was carried out. The total and ethylenediaminetetraaceticacid (EDTA)-extractable HMs in agricultural soil and untreated domestic sewage sludge samples, and the correlation between the total and extractable metals in soil and sewage sludge were carried out. Pot experiments were performed to study the transfer of HMs to maize grains, grown in soil (control) and in soil amended with sewage sludge (test samples). The total and extractable HMs in soil, sewage sludge, and maize grains were analysed by FAAS/ETAAS (flame atomic absorption spectrometer/electrothermal atomic absorption spectrometer) after digestion in microwave oven. Statistically significant correlations were obtained between the total contents of Cu, Cd, As and their respective extractable fractions in soil, while in domestic wastewater sludge (DWS) the better correlation was observed only for Ni and Cd. The edible part of maize plants (grains) from test samples presented high concentration of Zn, Pb, Ni, Cd, Cu, As, and Cr concentrations (80.7–85.6, 3.8–3.95, 2.35–2.5, 0.75–0.82, 3.21–3.29, 0.23–0.27, and 0.22–0.29?mg?kg^?1, respectively). Good correlations were found between metals in exchangeable fractions of both soil and DWS and total metals in control and test samples of maize grains. The transfer factor of all HMs from DWS to maize grains was also determined.     

Evaluation of pesticides multiresidue contamination of khat leaves from Jazan region,Kingdome Saudi Arabia,using solid-phase extraction – gas chromatography/mass spectrometry

The habit of khat chewing is widespread with a deep-rooted sociocultural tradition in these regions and as such poses a public health problem. The use of pesticides is considered to be indispensable practice for the production of adequate food supply for the increasing demands by the global population and for control of insect-borne diseases. Thus, contamination of the environment with pesticides and entry of these chemicals into the food chain is unavoidable especially in developing countries. The main objective of our current study was to assess pesticide pollution of khat leaves (unknown origin) obtained while being smuggled into the Kingdom of Saudi Arabia and to be used in Jazan area. A total of 120 khat leaf samples were extracted using solid-phase extraction followed by gas chromatography/mass spectrometry analysis for the presence of 69 standard pesticides using an internal standard, tiphenyl phosphate. No pesticide residues were detected in all the studied samples. These data as preliminary and more experiments need to be performed to confirm our present findings. Routine monitoring of the pesticide residues is important for the prevention, control, and reduction of environmental pollution and also for legal decisions to minimize health risks.     

Rapid liquid chromatographic analysis of Metoclopramide in pharmaceutical preparations

A sensitive, accurate and reproducible method for the analysis of metoclopramide, a gastrointestinal drug, has been described. An isocratic HPLC elution method was employed which requires about 10 minutes to be performed. The concentration of metoclopramide hydrochloride preparations was found to be 95.1 ±0.3% and 94.21 ±0.25% in tablet and injection formulations, respectively.     

Potentiometric studies of mixed complexes of cobalt(II) and copper(II) with l‐Asparagine and adenine

A potentiometric titration technique has been used to determine the stability constants for the various complexes of Co(II) and Cu(II) with L‐asparagine and from DNA base, e.g. adenine. Stability constants of ternary systems have been evaluated by the method suggested by Irwing‐Rossotti. In addition, the conditional constants were calculated as a function of pH. The maximum values of the conditional formation constants were found to be in accordance with the mixed‐ligand complex formation constants in a determined pH region. Furthermore, the molar fractions of different species from mixed complexes were calculated by means of formation constants. The values of stability constants of mixed‐ligand complexes at 25°C are as follows: log K= 5.25 for Co(II)‐L‐asparagine‐adenine; log K= 9.30 for Cu(II)‐L‐asparagine‐adenine. The ionic strength was kept constant at I = 0.20 with NaClO₄.     

Numerical study of coastal sandbar migration, by hydro-morphodynamical coupling

We present a numerical model based on the hydro-morphodynamical coupling to study coastal sandbar migration. In order to improve both nonlinear and dispersive wave processes in relatively shallow water, we developed a finite element model based on the Legendre polynomials and on the Extended Boussinesq model. This model reproduces the propagation of wave trains with a high degree of accuracy on a greater range of depths than the standard Boussinesq models. We also implemented the Total Variation Diminishing schemes to improve the quality of the computed hydrodynamic fields, especially in areas where sharp flow gradients occurred. The coupled morpho-hydrodynamical model is then used to simulate the migration of real sandbars observed at Rousty beach (Mediterranean French coast). For verification the model results are compared with field measurements obtained from a small-scale field campaign carried out over two years at Rousty beach, and the results of this comparison are thoroughly discussed and analyzed.     

Improved power density and Cr/Pb removal using ozone in a microbial desalination cell

Environmental Chemistry Letters - Microbial desalination cells are promising bio-electrochemical technologies for water desalination, treating wastewater and bioelectricity production. In this...     

Mechanochemical activation for lead extraction from spent cathode ray tube

Journal of Material Cycles and Waste Management - In this study, a mechanochemical activation technique to effectually extract lead from the funnel glass of cathode ray tube (CRT) is proposed. A...     

Techno-Economic Study of CO2 Capture from an Existing Cement Plant Using MEA Scrubbing

Carbon dioxide is the major greenhouse gas responsible for global warming. Man-made CO₂ emissions contribute approximately 63% of greenhouse gases and the cement industry is responsible for approximately 5% of CO₂ emissions emitting nearly 900 kg of CO₂ per 1000 kg of cement. CO₂ from a cement plant was captured and purified to 98% using the monoethanolamine (MEA) based absorption process. The capture cost was $51 per tonne of CO₂ captured, representing approximately 90% of total cost. Steam was the main operating cost representing 39% of the total capture cost. Switching from coal to natural gas reduces CO₂ emissions by about 18%. At normal load, about 36 MW of waste heat is available for recovery to satisfy the parasitic heat requirements of MEA process; however, it is very difficult to recover.     

17β-estradiol and testosterone sorption in soil with and without poultry litter

17β-estradiol and testosterone are naturally occurring steroids that co-occur in poultry litter. The effects of litter on sorption of these hormones to soil are not known. Sorption isotherms were developed for C-labeled testosterone and H-labeled estradiol in a Cecil sandy clay loam with and without poultry litter addition. The effect of applying the hormones alone (single-sorbate) or together (multisorbate) was also investigated. C-testosterone sorption in soil increased from 2 to 48 h and remained relatively constant thereafter. H-estradiol sorption in soil was relatively constant from 2 to 24 h and then decreased to 72 h. These differences may reflect transformation of the parent hormones to products with different solid-phase affinity. The maximum sorption coefficient () in soil for C-testosterone (20.2 mL g) was similar to that for H-estradiol (19.6 mL g) in single-sorbate experiments. When hormones were applied together, sorption of both hormones in soil decreased, but the C-testosterone (12.5 mL g) was nearly twice as large as the H-estradiol (7.4 mL g). We propose this resulted from competition between the hormones and their transformation products for sorption sites, with C-testosterone and its expected transformation product (androstenedione) being better competitors than H-estradiol and its expected transformation product (estrone). When poultry litter was mixed with soil, sorption increased for H-estradiol but decreased for C-testosterone. This may have been because poultry litter slowed the transformation of parent hormones. Our results show that poultry litter could have important effects on the mobility of estradiol and testosterone.